1.3-ch hdmi video multiplexer
2.100% brand new and high quality
hdmi video multiplexer:3 channels fc connector with data
Introduction
Functional digital optic video transceiver&receiver ranges from 1 video channel to 64 video channels. It applies advanced digital video and optic fiber transmission technology to achieve real-time and synchronous transmission of high quality and non-compression signals on single-core optic fiber. It is a perfect solution for signal transmission over remote distance. With multi function available on one device, it makes fiber optic transmission much easier and less cost among kinds of signals transmission. Plug-and-play design, no spot adjustment, imported components, and international standards of optical and electrical interface offer great convenience and stability to customers.The optical transceiver are available for either standalone or rack-mount installation ,which is apply to different working environment.
Features
Video, audio, data, contact closure, Ethernet and telephone transmission can be achieved by one device to save much cost on purchasing, much energy and time on management. |
Directly compatible with NTSC, PAL, and SECAM CCTV camera systems. |
10-bit digital encoded technology and loss less broadcast quality transmission. |
Automatic compatible with PAL/NTSC/SECAM video formats. |
Protocols of RS-232, RS422, RS-485 are applied. |
Non-compression and non-distortion signal and real-time transmission to achieve high quality signal transmission solution. |
Modularization structure, industrial-grade design, SMT craft and good power supply ensure stable performance for 105hours with fault-free. |
No adjustment and easy management due to plug-and-play design, hot-swap function. |
LED status indicators offer right diagnostics of the system operating condition. |
All interface with excellent thunder and lightning protection. |
Stand-alone type and card-type installed in 19’’ 2U or 4U rack-mount chassis for centralized management. |
Specification
Video |
Non-compression and no-distortion |
Video standards: PAL/NTSC/SECAM |
Frequency Response: 8MHz |
Video connection: BNC |
Signal to Noise Ratio: > 65dB |
Optical |
Optic wavelength: 1310/1550nm |
Optic interface: FC/SC/ST |
Supported |
single mode: 9/125, multimode: 50,62.5/125 |
Path Loss: 20dBm |
Audio |
Audio width: 20Hz~20KHz |
Signal to Noise Ratio: > 85dB |
Data |
Data interface: RS-232, RS422 (full duplex), RS485 (half duplex) Manchester, Bi-phase |
Data rate per channel: Up to 512kb/s |
BER: <10-9 |
Ethernet |
Interface: RJ-45 |
Transmission rate: self-adaptive 10/100M or 10/100/1000M |
Operation mode: half /full duplex |
Telephone |
Interface: RJ-11 Width: 8 kHz |
Operation mode: Point to point hot line, program-controlled exchange mode. |
Distortion: <1% |
Signal to noise ratio :< 95dB |
General |
power supply: DC5V/1A( optional) |
operating temperature: -35°C~70°C |
operating humidity:0~95% |
3-ch hdmi video multiplexer